Adsorption Dryers Compressor
500RD Adsorption Compressed Air Dryer refrigerted dryer adsorption dryer low dew point

Choosing the correct air dryer type and dimension for the application is an important process that ensures the correct and efficient operation of the dryer and the application.

If the dryer is undersized:
1. Target dew point will not be reached.
2. Too high inlet water content will cause permanent damage to the adsorbent.
3. Too high air velocity will cause large pressure drop.
4. Intense movement of the adsorbent, which is caused by too high air velocity, causes intensive dust formation and reduces the lifetime of the adsorbent.
5. Indirect costs of undersized dryer are costs of reclamation, damage occurred in the production process, or even stop of production.

If the dryer is oversized:
1. Increased purge air consumption and thus higher energy losses.
2. In some oversized dryers the drying will be less effective due to low air velocities in the column which cause channelling.
3. Indirect costs of oversized dryer are costs of reclamation, damage occurred in the production process, or even stop of production.

⊙ Adsorption dryer configuration schematics


⊙ High efficiency heat exchanger

➤ Adopting high strength thick copper pipe and oxygen-free welding with quotient silver content electrode; long service life and high heat transfer efficiency.
➤ Adopting anaerobic welding method, the system is free of impurities and keeps the system clean. The whole series of copper tubes are manufactured by mechanical expansion, which are closely combined with fins, with low heat transfer impedance and high heat transfer efficiency.
➤ The coil is cleaned by sound wave and there is no residual oil. It is not easy for eel slices to stick dust, and no carbonization occurs during welding.
➤ Adopt the anaerobic welding method to ensure the cleanliness of the system.

⊙ Adsorption Dryers Compressor Specification

The biggest usage condition:A.Entrance temperature 40℃ B.The air pressure 10Kg/cm³; Rebirth breeze quantity 12%;
Girculation time be 5 minutes; Time of rebirth is 4.5minutes;
Continous press time for 0.5 minutes; The atmospheric pressure of the dewdrop temperature 40℃; The power supply is 10 Ф 220V 50 Hz/60Hz.

⊙ Combined dryer

The biggest usage condition:A.Entrance temperature 40℃ B.The air pressure 10Kg/cm³; Rebirth breeze quantity 12%;
Girculation time be 5 minutes; Time of rebirth is 4.5minutes;
Continous press time for 0.5 minutes; The atmospheric pressure of the dewdrop temperature 40℃; The power supply is 10 Ф 220V 50 Hz/60Hz.

        Shanghai Schneider-Sunshine Mechanical Group is co-invested by Schneider Investment Group（Canada）,Shanghai Sunshine Co., Ltd and TMC Group (Italy), and mainly engaged in compressor manufacture, sales, Customer Service and its technology R&D. We have full experienced technology, advanced production equipment, complete quality assurance system and good sale-after service. We have a wide range of compressor products, including Screw Air Compressor, Permanent Magnetic Compressor, Process Screw Compressor, Vane Compressor, Oil-free compressor, Air Purification Equipment, Air Drier, Remote Monitoring System Based on IOT etc. and our products’ capacity covers from 1 m³/min to 100 m³/min. Our products have been certificated by “Shanghai Well-Known Brand Products” “Recommend Engineering Construction Products”, also our company is ISO9001:2008 and ISO14001:2004 Certificated enterprise, and one of the state-grade Hi-tech enterprise.

        Since its inception the company of his strong scientific and technological forces, advanced production equipment, has introduced new high-technology products. Products widely used in machinery, light industry, food, petroleum, chemicals, metallurgy, electricity, urban construction, medical research and scientific research for national defense and other industries. Products sold throughout the country and Europe, the Americas and Africa.

       The company's office corner, spacious office area, and various departments work closely together to provide customers with fast and convenient services.

        Company strictly abide by the group policy, adhering to the “people-oriented, credibility first, customer service” as the objective; Uphold the “scientific management, elaborate manufacture” as management concept; Adhered to the “cohesion, do better, boehner, innovation” for the enterprise spirit; Manufacturing enterprise will be “first-class air system” as the goal, the company in technology, quality, management, and equipment in the same industry leading position, the company will, as always, to high-quality products, excellent service sincerely cooperate with friends both at home and abroad, create brilliant.